Industrial and vehicular monitor - MRF series
MRF series are industrial grade and vehicular monitor, specially designed for private and public transportation vehicles. They include optical enhancements for a good visibility. These enhancements have been developed in the Inelmatic Optical laboratory©.
MRF Series include LED backlight with 1000 nits brightness version, wide angle panel and optional touch screen options in Resistive & Multi-touch Projected Capacitive panels.
This monitor replaces the exterior bus side mirrors, ensuring a much better visibility, in particular at night or in difficult weather conditions. Is a good choice for bus coaches to replace old exterior mirrors. In case of bus bodybuilders, it can be integrated when the bus equipment is installed.
Including our display in digital mirror camera systems, it increases safety by covering a greater field of vision, eliminating the blind spot. In other words, it is possible to drive in comfort and maneuver easily in all traffic situations, so increasing safety for the driver and other road users.
By eliminating the exterior mirrors, the aerodynamics of the vehicle will be improved, thus saving fuel.
(Ask for a specific size)
Wide power supply range
9-36VDC, 72VDC, 110VDC
VGA / DVI / HDMI
Resistive / Capacitive Touch
Resistive 4/5 wires / Projected capacitive multi touch
(see below drawings)
Panel type, custom options, VESA 75mm
-10ºC to +70ºC
1G 2-50Hz / 10G 11ms
Bus bodybuilders, bus coach, bus fleet
Train, metro, tram
MRF1230 is a 12 inches display of the new generation of digital rear mirrors for the automotive industry. They are suitable option for an installation in the bus fleets, for both bus bodybuilders and replacement the old mechanical mirrors in bus coach operators. In both cases we are able to adjust the enclosure in your bus chassis.
It includes a high featured controller with automatic and manual backlight adjustment, depending of the ambient light, which makes it suitable for bus and railway drivers in hard lighting conditions such as tunnels or direct sunlight.
The MRF1230 is available with VGA, DVI or HDMI input. Custom inputs are also available. All inputs are available as factory option on the rear panel. Optionally it includes “all-in-one cable”, with a lockable connector for an easy and quick installation.
For automotive regulations it supports a wide power supply ranges: 9-16VDC, 72VDC and 110VDC.
12.3 inches TFT
DVI / VGA / HDMI
Resistive 4 or 5 Wires / Projected Capacitive Multi-touch
9-36VDC, 72VDC, 110VDC
22W / 30W
Panel Type, Custom Option, VESA75 optional
12 months international, 24 months Europe
CE*, e-mark*, EN50155* (*upon request)
Automotive: Bus, train, railway digital rear mirror
321.3 x 138.8 x 29.7 mm (see drawing)
Steel and Aluminum
-40ºC to 85ºC
1000 nits +/-15%
178º H, 178º V
Sunlight Readable and Transflective
Our support team will help you to achieve your requirements